This anti-aging spray makes use of multifunctional active ingredient Eurol BT for its moisturizing, skin elasticizing, skin lightening and free radical quenching properties towards reversing the visible signs of skin aging. Highly protective SolaStay S1- photostabilized broad spectrum sun protection is also included to resist further aging of the skin. This product was subjected to in vitro analysis and delivered SPF ~55, PFA (PPD) ~22 performance with critical wavelength 375 nm. Always shake sample well before use.
| Phase | INCI Name [INN/USAN] (Other Information) | Trade Name | % Wt | Function |
|---|---|---|---|---|
| A | Water (Aqua) (deionized) | up to 100 | Volatile Carrier | |
| Disodium EDTA | 0.05 | Chelating Agent | ||
| Xanthan Gum (pharma grade) | 0.15 | Thickener (Aqueous) | ||
| B | Homosalate [Homosalate] | 15.00 | UV Filter / Sunscreen Agent | |
| Ethylhexyl Salicylate [Octisalate] | 5.00 | UV Filter / Sunscreen Agent | ||
| Ethylhexyl Olivate | SENSOLENE® | 2.00 | Multifunctional Lipid | |
| Butyloctyl Salicylate | HALLBRITE® BHB* | 5.00 | Emollient / Sunscreen Solvent | |
| Ethylhexyl Methoxycrylene | SolaStay® S1* | 2.00 | Photostabilizer | |
| Diisobutyl Adipate | HALLTRESS® DIBA SPECIAL | 6.00 | Solvent | |
| C | BHT | 0.10 | Antioxidant Agent | |
| Butyl Methoxydibenzoylmethane [Avobenzone] | 3.00 | UV Filter / Sunscreen Agent | ||
| Benzophenone-3 [Oxybenzone] | 5.00 | UV Filter / Sunscreen Agent | ||
| D | Ceteareth-25, Disodium Ethylene Dicocamide PEG-15 Disulfate | 3.00 | Emulsifier | |
| Tri-C14-15 Alkyl Citrate | 1.50 | Conditioning Agent | ||
| E | Styrene/Acrylates Copolymer (hollow spherical, 325 nm) | 3.00 | SPF Booster | |
| F | Water (Aqua) (deionized) | 9.60 | Volatile Carrier | |
| Microcrystalline Cellulose, Cellulose Gum | 0.40 | Thickener (Aqueous) | ||
| G | Preservative | a.n. | Preservative | |
| Glycerin | 3.00 | Humectant | ||
| H | Cyclopentasiloxane | 2.00 | Emollient | |
| Olea Europaea (Olive) Leaf Extract, Water | EUROL® BT | 0.20 | Multifunctional Active Ingredient | |
| I | PPG-17/IPDI/DMPA Copolymer | 3.50 | Film Former |
| 1 | To the main vessel add Water of phase A, start mixing, add the remaining phase A ingredients in order, and heat to 70°C. |
| 2 | To another vessel add phase B, start mixing, add in order phase C ingredients, heat to 70°C, add phase D ingredients, and then add phase E. |
| 3 | With both phases homogeneous and at 70°C, add phase BCDE to phase A with stirring and after 5 min, start cooling and homogenize for 3 min. |
| 4 | Resume mixing while cooling and, at 50°C or lower, very slowly add previously prepared phase F dispersion. |
| 5 | After 20 minutes add phase G premix, then phase H items in order and, when batch is 35°C or lower, then add phase I with mixing. |
| 6 | Replace any water lost to evaporation and mix until smooth. Perform quality assurance checks and package product. |
| Appearance | Light yellow liquid |
| Viscosity (Brk, RVDV-II, Sp 4, 100 rpm, after 24 h at room temperature; mPa·s) | 400 - 650 |
| pH | 6.5 - 7.5 |
*Patented and Patent Pending
The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements
The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA
Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com
© 2023 Hallstar. All Rights Reserved.
Distributor Login
Print 
PDF