Clean your face, restore your skin, reduce redness. Floral Infusion water is the perfect solution to clean and restore the skin of the face: specifically designed to satisfy the needs of sensitive skin, Floral Infusion contains a balanced complex of “relidipifying” agents like Florasolvs® PEG-16 Macadamia and Florasolvs® PEG-10 Sunflower, that help the skin barrier to recover its optimal conditions. The addition of Eurol® BT, a multifunctional botanically-derived active ingredient, moisturizes, soothes and calm irritated skin thanks to its anti-oxidant properties.
| Phase | INCI Name [INN/USAN] (Other Information) | Trade Name | % Wt | Function |
|---|---|---|---|---|
| A1 | Water (Aqua) (deionized) | 32.40 | Volatile Carrier | |
| A2 | PEG-16 Macadamia Glycerides | FLORASOLVS® MACADAMIA-16 | 6.00 | Emollient |
| PEG-10 Sunflower Glycerides | FLORASOLVS® SUNFLOWER-10 | 0.45 | Emollient | |
| B | Water (Aqua) (deionized) | up to 100 | Volatile Carrier | |
| Allantoin | 0.30 | Active Ingredient | ||
| C | Rosa Centifolia Flower Water | 6.00 | Active Ingredient | |
| Olea Europaea (Olive) Leaf Extract, Water | EUROL® BT | 0.30 | Multifunctional Active Ingredient | |
| Aloe Barbadensis Leaf Juice | BIOCHEMICA® BIOVERA 10X ALOE | 0.30 | Active Ingredient | |
| Propylene Glycol, Water, Calendula Officinalis Flower Extract | 0.40 | Active Ingredient | ||
| Betaine | 1.00 | Active Ingredient | ||
| Preservative | a.n. | Preservative | ||
| D | Sodium Hydroxide (10% aqueous) | a.n. | pH Adjuster |
| 1 | Mix the component of phase A2 till they are completely mixed in; |
| 2 | Add phase A1 into phase A2 under fast stirring (400-450 RPM) drop by drop until the emulsion inverts and then continue adding phase A1 faster; |
| 3 | Prepare phase B heating the water until it is at 50°C and disperse the allantoin in it; |
| 4 | Cool down phase B to room temperature; |
| 5 | Prepare phase C, dispersing all its ingredients in the floral water; |
| 6 | Add phase C to Phase B mixing; |
| 7 | Add phase B+C to phase A1+A2 under gentle agitation; |
| 8 | Adjust the pH of the combined phases with phase D to between 6.5 - 7.0 if necessary. |
| Appearance | Pale yellow transparent water |
| Viscosity (Brk, RVDV-E, Sp 1, 20 rpm, after 24 h at room temperature; mPa·s) | 10 - 20 |
| pH | 6.5 - 7.0 |
*Patented and Patent Pending
The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements
The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA
Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com
© 2023 Hallstar. All Rights Reserved.
Distributor Login
Print 
PDF