This simple process daily wear lightweight sunscreen lotion provides broad spectrum sun protection. HallBrite® EZ-FLO TDX Plus contains SolaStay® S1 (Ethylhexyl Methoxycrylene), which mitigates the photocatalytic and reactive oxygen species-generating activities of the oxides, and HallBrite® BHB (Butyloctyl Salicylate), which contributes a very good dispersion for Titanium Dioxide. In vivo testing in an EU laboratory yielded static SPF 30.8. In vitro analysis suggests SPF ~34, PFA (PPD) ~14, performance with critical wavelength 380 nm.
Phase | INCI Name [INN/USAN] (Other Information) | Trade Name | % Wt | Function |
---|---|---|---|---|
A | Octocrylene [Octocrilene] | 5.00 | UV Filter/Sunscreen Agent / Carrier System | |
Isopropyl Myristate | HALLSTAR® IPM-NF | 12.00 | Emollient | |
Butyl Methoxydibenzoylmethane | 2.00 | UV Filter / Sunscreen Agent | ||
B | Butyloctyl Salicylate, Titanium Dioxide (nano) [Titanium Dioxide] (23%), C12-15 Alkyl Benzoate, Ethylhexyl Methoxycrylene, Triceteareth-4 Phosphate, Dimethicone Crosspolymer, Silica | HALLBRITE® EZ-FLO TDX PLUS* | 17.00 | UV Filter/Sunscreen Agent / Photostabilizer / Carrier System |
Glycine Soja (Soybean) Oil* (and) Polyglyceryl-3 Diisostearate (and) Oryza Sativa (Rice) Germ Extract (and) Oryza Sativa (Rice) Extract | BLUE Oléoactif® | 1.00 | Active Ingredient | |
Cetyl PEG/PPG-10/1 Dimethicone | 3.50 | Emulsifier | ||
PEG-12 Dimethicone | 1.50 | Conditioning Agent | ||
Cyclopentasiloxane, Disteardimonium Hectorite, Propylene Carbonate | 4.00 | Viscosity Increasing Agent (Nonaqueous) | ||
Cyclopentasiloxane, Acrylates/Dimethicone Copolymer | 1.50 | Film Former | ||
Silica (spherical, 12 µm) | 2.00 | Deoiling Agent | ||
C | Water (Aqua) | up to 100 | Volatile Carrier | |
Glycerin | 8.00 | Humectant | ||
Caprylyl Glycol, Phenoxyethanol, Hexylene Glycol | a.n. | Preservative | ||
Disodium EDTA | 0.05 | Chelating Agent | ||
Sodium Chloride | 1.00 | Emulsion Stabilizer |
1 | To the main vessel, add phase A and start mixing strongly. When solids are almost dissolved, add phase B and mix until uniform. |
2 | To a secondary vessel add phase C, start mixing and continue mixing until fully incorporated. |
3 | When both phases are homogeenous, very slowly add phase C to phase AB and mix until uniform. |
Appearance | Off-white thin lotion |
Viscosity (20 rpm, Brk, RVII, SP 4, after 24h at room temperature; mPa∙s): | 600 - 1000 |
*Patented and Patent Pending
The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements
The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA
Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com
© 2023 Hallstar. All Rights Reserved.