SolaStay® S1 is incorporated to mitigate the photocatalytic and reactive oxygen species generating activities of oxides, protecting from photodegradation, and so improving sunscreen performance. HallBrite® BHB aids wetting and dispersion of oxides and enhances product feel. This broad-spectrum mineral sunscreen cream was subjected to in vitro analysis and delivered SPF ~42, PFA (PPD) ~18 performance with critical wavelength 378 nm.
Phase | INCI Name [INN/USAN] (Other Information) | Trade Name | % Wt | Function |
---|---|---|---|---|
A | Caprylic/Capric Triglyceride | 10.00 | Emollient | |
Ethylhexyl Olivate | SENSOLENE® | 3.00 | Emollient | |
Butyloctyl Salicylate | HALLBRITE® BHB* | 5.00 | Emollient | |
Tocopheryl Acetate | 0.20 | Antioxidant Agent | ||
Ethylhexyl Methoxycrylene | SolaStay® S1* | 2.00 | Photostabilizer | |
Cyclopentasiloxane, Disteardimonium Hectorite, Propylene Carbonate | 3.00 | Feel Modification / Enhancement | ||
Cetyl PEG/PPG-10/1 Dimethicone | 2.50 | Emulsifier | ||
Cetyl Dimethicone | 1.00 | Skin Conditioning Agent | ||
B | Titanium Dioxide [Titanium Dioxide], Aluminum Hydroxide (60 nm primary particle size) | 3.00 | UV Filter / Sunscreen Agent | |
Zinc Oxide [Zinc Oxide], Triethoxycaprylylsilane (30-200 nm primary particle size) | 8.00 | UV Filter / Sunscreen Agent | ||
C | Beeswax (Cera Alba) | 0.30 | Thickener (Nonaqueous) | |
C30-38 Olefin/Isopropyl Maleate/MA Copolymer | 0.50 | Film Former | ||
D | Water (Aqua) (deionized) | up to 100 | Volatile Carrier | |
Disodium EDTA | 0.05 | Chelating Agent | ||
Sodium Chloride | 0.50 | Emulsion Stabilizer | ||
E | Butylene Glycol | 3.00 | Humectant | |
Preservative | a.n. | Preservative |
1 | To the main vessel add phase A and start mixing, disperse phase B in phase A and heat phase AB to 85°C. |
2 | Add phase C to phase AB and mix well until all are dissolved. |
3 | To a secondary vessel add phase D, start mixing and when fully incorporated start heating to 80°C and add phase E. |
4 | When both phases are homogeneous and at their designated temperatures, start homogenizing phase ABC and slowly add phase DE to it under homogenization. |
5 | Cool batch under continued shear until to desired filling temperature. |
Appearance | Off-white cream |
Viscosity (Brk, RVDV-II, T-D, 20 rpm, after 24 h at room temperature; mPa∙s) | 17,000 - 29,000 |
*Patented and Patent Pending
The information presented herein is believed to be accurate and reliable, but no warranty or guarantee, expressed or implied, is made regarding the information or the performance of any product. Further, nothing contained herein shall be taken as any inducement or recommendation to use, manufacture or sell that may infringe any patents or any other proprietary rights now or hereafter in existence, nor to imply compliance with any regulatory requirements
The Hallstar Company - 120 South Riverside Plaza Suite 1620 - Chicago, IL 60606-3911 USA
Tel.: 877 427 4255 (International n.: +1 312 385 4494) - Fax: +1 330 929 3616 - E-mail: customerservice@hallstar.com Web Site: hallstar.com
© 2023 Hallstar. All Rights Reserved.